RE: [swinog] ISDN Layer 2 Problem - swinog

3 Mar 2005


      Erichs config looks good!
That's why I said
...
what BRI interface config you use...
I don't like shooting in the dark...
Christian
-----Original Message-----
From: swinog-bounces@lists.swinog.ch
[mailto:swinog-bounces@lists.swinog.ch]On Behalf Of Erich Hohermuth
Sent: Donnerstag, 3. März 2005 15:02
To: swinog@swinog.ch
Subject: Re: [swinog] ISDN Layer 2 Problem
Hello
I use the following config with the 836er Cisco Routers.
...
I think it's more an generic problem then a product specific
one... but:
interface BRI0
 no ip address
 encapsulation ppp
 no ip route-cache
 no ip mroute-cache
 load-interval 30
 dialer pool-member 6
 isdn switch-type basic-net3
 isdn tei-negotiation first-call
 no cdp enable
 ppp multilink
Regards
    Erich
-- 
* Erich Hohermuth IP Engineer - SolNet (AS 9044) PGPKEY-46A08FCB *
   * phone: +41 32 686 82 22 / sip:9044*463@inoc-dba.pch.net *
_______________________________________________
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog