Erichs config looks good!
That's why I said
> what BRI interface config you use...
I don't like shooting in the dark...

Christian

-----Original Message-----
From: swinog-bounces@lists.swinog.ch
[mailto:swinog-bounces@lists.swinog.ch]On Behalf Of Erich Hohermuth
Sent: Donnerstag, 3. März 2005 15:02
To: swinog@swinog.ch
Subject: Re: [swinog] ISDN Layer 2 Problem

Hello

I use the following config with the 836er Cisco Routers.

> I think it's more an generic problem then a product specific
> one... but:

interface BRI0
 no ip address
 encapsulation ppp
 no ip route-cache
 no ip mroute-cache
 load-interval 30
 dialer pool-member 6
 isdn switch-type basic-net3
 isdn tei-negotiation first-call
 no cdp enable
 ppp multilink

Regards
        Erich

--
* Erich Hohermuth IP Engineer - SolNet (AS 9044) PGPKEY-46A08FCB *
   * phone: +41 32 686 82 22 / sip:9044*463@inoc-dba.pch.net *
_______________________________________________
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog