Hi Andi
Is there anyone who owns a cat 3750 with a newer sw-release then 12.1.19? It would be great if you could test if you can apply the command "switchport mode dot1q-tunnel" in the interface configuration mode.
Yes, it does with 12.2(25). Tested on a 3750G-12 with C3750-ADVIPSERVICESK.
cu
Martin Jaggi Network Engineer, CCNP, Compaq ASE ______________________________________________________________________ martin.jaggi@lan.ch, phone: +41(0)32 327 3311, fax: +41(0)32 327 3310 LAN Services AG, Bahnhofplatz 6, 2501 Biel/Bienne, Switzerland
There are only 10 types of people in the world: those who understand binary, and those who don't.
Hi Martin
tanks, can u tell me if it needs ADVIPSERVICESK image or is it just because the sw on my switch is to old?
Andi
-----Ursprüngliche Nachricht----- Von: swinog-bounces@lists.swinog.ch [mailto:swinog-bounces@lists.swinog.ch]Im Auftrag von Martin Jaggi Gesendet: Dienstag, 19. April 2005 20:36 An: swinog@swinog.ch Betreff: AW: [swinog] dot1q-tunnel
Hi Andi
Is there anyone who owns a cat 3750 with a newer sw-release then 12.1.19? It would be great if you could test if you can apply the command "switchport mode dot1q-tunnel" in the interface configuration mode.
Yes, it does with 12.2(25). Tested on a 3750G-12 with C3750-ADVIPSERVICESK.
cu
Martin Jaggi Network Engineer, CCNP, Compaq ASE ______________________________________________________________________ martin.jaggi@lan.ch, phone: +41(0)32 327 3311, fax: +41(0)32 327 3310 LAN Services AG, Bahnhofplatz 6, 2501 Biel/Bienne, Switzerland
There are only 10 types of people in the world: those who understand binary, and those who don't. _______________________________________________ swinog mailing list swinog@lists.swinog.ch http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
-
alfello -
Martin Jaggi