What ISDN switch type is configured?
-----Original Message----- From: swinog-bounces@lists.swinog.ch [mailto:swinog-bounces@lists.swinog.ch]On Behalf Of Beat Rubischon Sent: Donnerstag, 3. März 2005 14:48 To: 'swinog@swinog.ch' Subject: RE: [swinog] ISDN Layer 2 Problem
Hello!
Am 03.03.05 schrieb Kuster, Christian:
It probably will help very much if you say : what router, what IOS version what BRI interface config you use...
I think it's more an generic problem then a product specific one... but:
---8<--- rt-1#show version Cisco IOS Software, C836 Software (C836-K9O3S8Y6-M), Version 12.3(8)YA1, RELEASE SOFTWARE (fc1) Synched to technology version 12.3(9.6)T Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Fri 21-Jan-05 17:22 by ealyon
ROM: System Bootstrap, Version 12.2(11r)YV1, RELEASE SOFTWARE (fc1) ROM: Cisco IOS Software, C836 Software (C836-K9O3S8Y6-M), Version 12.3(8)YA1, RELEASE SOFTWARE (fc1)
rt-1 uptime is 2 days, 15 hours, 56 minutes System returned to ROM by reload at 01:42:52 CET Fri Mar 1 2002 System restarted at 22:49:01 CET Mon Feb 28 2005 System image file is "flash:c836-k9o3s8y6-mz.123-8.YA1.bin"
[cryptographic blabla]
Cisco C836 (MPC857T) processor (revision 0x201) with 46695K/2457K bytes of memory. Processor board ID FOC09042B0E (623996758), with hardware revision 0000 CPU rev number 7 2 Ethernet interfaces 4 FastEthernet interfaces 1 ISDN Basic Rate interface 1 ATM interface 128K bytes of NVRAM. 12288K bytes of processor board System flash (Read/Write) 2048K bytes of processor board Web flash (Read/Write)
Configuration register is 0x2102 ---8<---
Beat