swinog

swinog@lists.swinog.ch

2916 discussions

X.21, V.35 Cisco Interface in Master Mode
by Andre Oppermann 02 Sep '05

02 Sep '05

Is anyone of you running a Cisco with X.21 or V.35 interface in master mode (the Cisco is supplying the clocking on the line). Normally the modem (DCE) supplies the line clock to the Cisco. I'm interested in (production) cases where you had to supply the clock from the cisco to the other side. -- Andre

5 4

RE: [swinog] X.21, V.35 Cisco Interface in Master Mode
by Güntensperger, Robert 02 Sep '05

02 Sep '05

Hi André We've used this several times for customer connections at TIX. You need on one side a DTE and on the other side a DCE cable. As soon as the DCE cable is connected, can you set the clock rate on this I/F. --> X.21 up to 8Mbit/s Cheers, Günti > -----Original Message----- > From: swinog-bounces(a)lists.swinog.ch > [mailto:swinog-bounces@lists.swinog.ch]On Behalf Of Andre Oppermann > Sent: Donnerstag, 1. September 2005 19:47 > To: swinog(a)swinog.ch > Subject: [swinog] X.21, V.35 Cisco Interface in Master Mode > > > Is anyone of you running a Cisco with X.21 or V.35 interface in > master mode (the Cisco is supplying the clocking on the line). > Normally the modem (DCE) supplies the line clock to the Cisco. > > I'm interested in (production) cases where you had to supply the > clock from the cisco to the other side. > > -- > Andre > _______________________________________________ > swinog mailing list > swinog(a)lists.swinog.ch > http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog >

1 0

Re: swinog Digest, Vol 7, Issue 6
by Peter Leuzinger 01 Sep '05

01 Sep '05

Sehr geehrte(r) Damen und Herren Besten Dank für Ihre eMail ! Ab Samstag, 20. August bis Sonntag, 4. September 2005 bin ich ferienabwesend. Bitte kontaktieren Sie in der Zwischenzeit für technische Belange Herrn Jan Elmer, jane(a)speednames-business.ch; für verkaufsorientierte und administrative Themen Herrn Sasha Arn, sasha(a)speednames-business.ch. Ab Montag, den 5. September 2005, freue ich mich sehr, Ihnen eine baldmöglichst Antwort zu geben. Besten Dank, und mit freundlichen Grüssen Thank you for your message. I am out of office from August 20 until September 4 and will not be able to check my mail box. ONLY, in case of any urgent technical matter, please contact: Jan Elmer, jane(a)speednames-business.ch - Tel. +41. 44 204 16 93 (direct). Best regards Peter Leuzinger, MBA Key Account Management Speednames GmbH - Staffelstrasse 10 - CH-8045 Zürich Tel. +41. 44 204 16 80 Fax. +41. 44 204 16 81

2 1

CCNP
by Zoran Brakus 31 Aug '05

31 Aug '05

Hello I'm looking for a best way to upgrade my CCNA and become a CCNP. At the moment, I have the following options on my mind: a) CCNP academy - it costs around 16k CHF; a lot of money, isn't it? - is CCNP course organized somewhere in Zürich or Zug (preferably on weekends)? - can I expect to have academy lessons in English language or only German? b) to make my own lab (ebay), buy all books and try to become a "home made" CCNP? :-) c) ? I would appreciate any info and/or suggestions. Thanx -- Regards, Zoran Brakus

6 9

RE: [swinog] manufacturer for good rack cabinets?
by Jérôme Tissières 31 Aug '05

31 Aug '05

I agree with Gunther, for me Rittal is the best. http://www.rittal.ch/ Jerome > -----Message d'origine----- > De : swinog-bounces(a)lists.swinog.ch > [mailto:swinog-bounces@lists.swinog.ch] De la part de Gunther > Stammwitz > Envoyé : mercredi, 31. août 2005 15:35 > À : swinog(a)swinog.ch > Objet : AW: [swinog] manufacturer for good rack cabinets? > > Try RITTAL - we've been trying 4 or 5 different vendors and > came to the conclusion that rittal is the only one who can > deliver a really good quality and racks that allow enough > airflow to cool 20 dual-opterons. > You should look for perforated doors if you ask me. > > > > -----Ursprüngliche Nachricht----- > > Von: swinog-bounces(a)lists.swinog.ch > > [mailto:swinog-bounces@lists.swinog.ch] Im Auftrag von Thomas > > Schneider > > Gesendet: Mittwoch, 31. August 2005 15:13 > > An: swinog(a)swinog.ch > > Betreff: [swinog] manufacturer for good rack cabinets? > > > > Hi All, > > > > can you recommend a manufacturer for good rack cabinets? > > There should be ventilation modules available for these > cabinets with > > at least 10m3/s. > > > > Thanks for any hints! > > Tom > > _______________________________________________ > > swinog mailing list > > swinog(a)lists.swinog.ch > > http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog > > > > > > _______________________________________________ > swinog mailing list > swinog(a)lists.swinog.ch > http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog >

1 0

manufacturer for good rack cabinets?
by Thomas Schneider 31 Aug '05

31 Aug '05

Hi All, can you recommend a manufacturer for good rack cabinets? There should be ventilation modules available for these cabinets with at least 10m3/s. Thanks for any hints! Tom

4 3

SwiNOG #11 - call for presentations
by Fredy Kuenzler 31 Aug '05

31 Aug '05

Dear all, Anyone having an interesting topic to be presented at SwiNOG #11 (Oct. 20th, 2005). Please send proposals to swinog-core(a)swinog.ch - we'll try to set an interesting agenda. As ususal, a beamer will be provided, and if you don't have your own notebook, there will be one available to present your slides to the audience. Don't be shy :-) - and be reminded that SwiNOG is a technical group, so please do not propose plain marketing / sales stuff. In the name of the SwiNOG core team: Fredy

7 6

Niksa Tomulic is out of the office.
by Niksa Tomulic 30 Aug '05

30 Aug '05

I will be out of the office starting 29.08.2005 and will not return until 02.09.2005. Hello I am currently on the business trip to Switzerland, with the limited access to my e-mail. Please note I will answer to your e-mail with a slight delay, but in the case of urgency don't hesitate to call me at +385 91 1288333 Best regards, Niksa Tomulic Director, Professional Services ccie #11548 NIL Data Communications Ltd., Tivolska cesta 48, 1000 Ljubljana, Slovenia Phone +386 1 4746 500 Fax +386 1 4746 501 http://www.nil.si/PS

1 0

Looking for WIC-2T
by Sarpreet 30 Aug '05

30 Aug '05

Hi, Does anyone have any WIC-2T's they would like to sell. Please reply off list. Regards, Sarpreet Basi Knowledge Computers Email: sar(a)knowledgecomputers.net Toll-free: 800.967.6609 x26 International: 250.748.0818 x26 Fax: 250.748.3388 Mobile: 250.709.0336 AOL IM: sarpreetb MSN: sarpreet(a)hotmail.com www.knowledgecomputers.net

1 0

Wanted: PA-8E
by Richard Klingler 30 Aug '05

30 Aug '05

Hello... Does somebody has a spare PA-8E for a 7206 to sell? Please no "try epray" replies (o; rick

2 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

swinog